Kinetis Design Studio by default uses an older version of EmbSysRegView. This article explains how to upgrade to the latest and greatest version 0.2.6. And how it is possible to use the latest NXP update for the 0.2.4 version:
Installed Files in Eclipse
I’m a fan of all kind of weather stations. When Daniel Eichhorn twittered about his new version using an E-Paper display module, I immediately preordered one. I decided to build a station with a custom enclosure, so here is my version of a 3D printed version, featuring magnets so it can be attached to the fridge:
E-Paper Weather Station
More and more these very-very-high-resolution (UHD, Ultra-High-Density) notebook displays show up in my class rooms.These displays have 3100×1800 or even more pixels, making it great for watching high-resolution videos or for playing games (maybe?). But such a high-resolution makes many tools including Eclipse very hard to use, because the toolbar icons get so tiny that they are really hard to hit with a mouse cursor on Windows:
Eclipse Icons with UHD Display
Most of the time I’m using a dedicated terminal program like Termite or PuTTY to connect to a board using virtual or non-virtual COM port. Another way is to use the Eclipse built-in Terminal view: that way no extra program is needed to communicate with a real or virtual COM port to my target device:
Terminal Command Output
It can happen to everyone using Eclipse: launching Eclipse with workspace, and then it is stuck loading it. As a last resort, create a new workspace and go on? Possible, but painful, right? For some time I have a strange issue nagging me: from time to time, I’m not able to switch to a workspace which worked before. The IDE starts loading, but then is stuck:
Eclipse Oxygen Stuck Loading Workspace
Using that 50 Watt laser machine (see “Getting Control over a 50 Watt CO2 Laser Cutter from China“) for several weeks now, I have added a few upgrades to the machine.
Magnets
For several projects I’m using library projects: I build a library and then use that library in the other project. If I change something in a library, I want to run make both on the referenced libraries and rebuild my application if needed. If you don’t know how to do this, then read on… 🙂
Shared Library Projects
(… actually it means workign around known Eclipse CDT bug too….)
ARM Cortex-M microcontrollers can have multiple memory controllers. This is a good thing as it allows the hardware to do multiple parallel memory read/writes. However this makes the memory map more complicated for the software: it divides the memory into different regions and memory segments. This article is about how to enable FreeRTOS to use multiple memory blocks for a virtual combined memory heap:
FreeRTOS with Segmented Heap Memory
Sometimes it is handy to know in the running application the start address, end address and the size of a linked section, e.g. to know the boundaries of RAM or FLASH areas. This means that from the application code I can get access to knowledge of the GNU linker:
Information about Linker Sections
Many of the NXP OpenSDA boot loaders are vulnerable to Windows 8.x or Windows 10: write accesses of Windows can confuse the factory bootloader and make the debug firmware and bootloader useless. In this post I show how to recover the bootloader using MCUXpresso IDE and the P&E Universal Multilink.
Using P&E Multilink Universal to restore the OpenSDA Bootloader on NXP FRDM-K22F Board
MCU on Eclipse 