Tag Archives: software

MCUXpresso IDE 11.5.0

Posted on by
6

I’m now in the middle of the university fall semester exam season with writing exams and grading student work, and the same time the new semester courses need to be prepared. With the global silicon and board shortage, this will be again a challenge to equip all the labs with the needed infrastructure. The good thing is that there is no shortage on software and tools side of the infrastructure: NXP released last week their new flagship Eclipse based IDE: the MCUXpresso IDE 11.5.0. Time to check it out for the upcoming lectures and classes….

NXP MCUXpresso IDE Version 11.5.0

Spoiler Alert: It has a new view for FreeRTOS lovers, plus new features for energy/power measurements!

Continue reading →

DIY Split-Flap Display

Posted on by
32

Split-flap displays are electromechanical display devices, which were common in airports or railway stations a few years ago.Unfortunately, most of them are gone and replaced by LED displays. Why not create a DIY version of it?

2×10 Split-Flap Display
Continue reading →

McuOnEclipse Components: 26-Dec-2021 Release

Posted on by
3

I’m pleased to announce a new release of the McuOnEclipse components, available on SourceForge. This release includes several bug fixes, support for more devices, and updated components like FreeRTOS, MinINI, Percepio Tracealyzer and SEGGER SystemView.

SourceForge

SourceForge

Continue reading →

Round MetaClockClock

Posted on by
5

It has been a while since my last MetaClockClock, and with the continued shortage of electronics on the market I had no chance to order new parts. But I still had some remaining parts, and with the modular design of the ’round’ clocks I was able to build up another one, but this time with even less than the usual minimum of 24 clocks:

So if you are up to build a MetaClockClock with less clocks, this might be the way for you.

Continue reading →

Position-Independent Code with GCC for ARM Cortex-M

Posted on by
61

Welcome to ‘Alice in Wonderland‘! For a university research project using an ARM Cortex-M33 we are evaluating position-independent code as way to load applications or part of it with a bootloader. It sounds simple: just add -fPIC to the compiler settings and you are done.

Unfortunately, it is not that simple. That option opened up a ‘rabbit hole’ with lots of wonderful, powerful and strange things. Something you might not have been aware of what could be possible with the tools you have at hand today. Leading to the central question: how is position-independent code going to work with an embedded application on an ARM Cortex-M?

Let’s find out! Let’s start a journey through the wonderland…

Continue reading →

Touch & Build: Auto-Update of Firmware Date and Time

Posted on by
15

It is very valuable to have a date and time information in the binary. That way for example using a shell I can check the version of the firmware running on a device, or it can be printed on a console or UART as needed.

Firmware Date and Time

Firmware Date and Time

Continue reading →

Error for ‘implicit function declaration’ Warning in C

Posted on by
18

“A young man is smoking one cigarette after each other without a pause. An elderly woman observes that and says: “Young man, you are smoking like crazy! Don’t you know that there is a warning on each cigarette package that this can kill you?” The young man finishes his cigarette, looks at the elderly person and says: “Yes, I know. But look, I’m a programmer, and it is only a warning.”

I don’t smoke, and I do pay attention to warnings :-). I always try to keep my source code free of compiler warnings. And I always pay special attention to the following on:

implicit declaration of function

implicit declaration of function

Continue reading →

Tutorial: GNU Coverage with MCUXpresso IDE

Posted on by
28

If you are developing Linux or desktop applications with GNU tools, you  very likely are familiar with gcov: the GNU coverage tool. It collects data what parts of the code gets executed and represents that in different formats, great to check what is really used in the application code or what has been covered during multiple test runs.

Coverage Information with gcov

Coverage Information with gcov

line never executed

line never executed

GNU coverage is possible for resource constraint embedded systems too: it still needs some extra RAM and code space, but very well spent for gathering metrics and improves the firmware quality. As I wrote in “MCUXpresso IDE V11.3.0 for 2021” things are now easier to use, so here is a short tutorial how to use it.

Continue reading →

NXP published MCUXpresso SDK 2.9.0 on GitHub

Posted on by
5

There are many different aspects of Open Source projects: It is not only about the fact if the sources are available (‘open’). It is about the licensing terms (how permissible is it, what can I do with it), maintenance and continuous development (what has changed between releases), how and where is it delivered (Sourceforge, dedicated distribution, packaging) up to collaboration (how can I contribute or submit issues).

NXP has now published the MCUXpresso SDK on Github:

MCUXpresso SDK on GitHub

MCUXpresso SDK on GitHub

Something I was waiting for a long time.

Continue reading →