It can happen to everyone using Eclipse: launching Eclipse with workspace, and then it is stuck loading it. As a last resort, create a new workspace and go on? Possible, but painful, right? For some time I have a strange issue nagging me: from time to time, I’m not able to switch to a workspace which worked before. The IDE starts loading, but then is stuck:
Eclipse Oxygen Stuck Loading Workspace
I’m pleased to announce that a new release of the McuOnEclipse components is available in SourceForge. In this release more ARM Cortex devices/vendors are supported with different SDKs, plus it comes with several FreeRTOS enhancements for debugging highly optimized code.
SourceForge
Using that 50 Watt laser machine (see “Getting Control over a 50 Watt CO2 Laser Cutter from China“) for several weeks now, I have added a few upgrades to the machine.
Magnets
For several projects I’m using library projects: I build a library and then use that library in the other project. If I change something in a library, I want to run make both on the referenced libraries and rebuild my application if needed. If you don’t know how to do this, then read on… 🙂
Shared Library Projects
(… actually it means workign around known Eclipse CDT bug too….)
ARM Cortex-M microcontrollers can have multiple memory controllers. This is a good thing as it allows the hardware to do multiple parallel memory read/writes. However this makes the memory map more complicated for the software: it divides the memory into different regions and memory segments. This article is about how to enable FreeRTOS to use multiple memory blocks for a virtual combined memory heap:
FreeRTOS with Segmented Heap Memory
After the “WiFi OLED Mini Weather Station with ESP8266“, here is another one: this time with Touch LCD :-):
LCD Weatherstation with ESP8266
I’m convinced that this ‘Internet of Things’ thing-thing is not real. Pure marketing and buz words without any added value, right? The IoT hype is so bizar: it must be originated by aliens which have taken over the brains of all the Pointy-haired Bosses of the world? There is no useful application or use case out there!
But wait! There *is* actually good use case, at least for the geeks of this world. We all love clocks as we want to know the time, and we all love the weather forecast so we can plan accordingly. At least I usually do :-).
SQUIX ESP8266 Mini Weather Station
Sometimes it is handy to know in the running application the start address, end address and the size of a linked section, e.g. to know the boundaries of RAM or FLASH areas. This means that from the application code I can get access to knowledge of the GNU linker:
Information about Linker Sections
Many of the NXP OpenSDA boot loaders are vulnerable to Windows 8.x or Windows 10: write accesses of Windows can confuse the factory bootloader and make the debug firmware and bootloader useless. In this post I show how to recover the bootloader using MCUXpresso IDE and the P&E Universal Multilink.
Using P&E Multilink Universal to restore the OpenSDA Bootloader on NXP FRDM-K22F Board
Title says everything 😉
Sunrise in Lucerne
Picture from this morning at 6:45am. Getting back to work after spending a hiking week in the Dolomites with two more posts to go. Going to work has its own beauty.
Happy Swaning 🙂
MCU on Eclipse 