The company Feller sells a wall mountable ‘Smart Light Control’: this provides 4 push buttons compatible with the Philips Hue system (on, off, dimming, etc). Unlike many other remote controls and buttons it is a great design and available in different colors. Feller does have a ‘classic’ wall switch series too, so this one is perfect to replace or augment an existing installation and make it ‘smart’.
Feller Smart Light Control
I had a few of PCBs left over from the V3 MetaClockClock, and originally I planned to finish a build with them by the end of 2020. But as always: things took a bit longer than expected, so I finally finished it today on the first day of the year 2021.
The build uses the same hardware as in the previous V3, but instead of an ‘artistic’ canvas background I decided for a more natural and wood design:
V4 with Walnut Veneer
The Eclipse CODAN (Code Analysis) plugin is part of CDT and is a powerful static analysis tool finding all kind of possible bugs and issues. Still to my surprise not many C/C++ developers take advantage of it maybe because they are not aware that it exists?
ups! Programming error detected by CODAN
In this article I show a few tips how to effectively use it, especially with the NXP MCUXpresso SDK.
The holiday break at the end of the year is always a good time to finish projects started during the year. This one is about my ‘MetaClockClock’ Version 3.
2020 with Red Hands on Blue
The NXP MCU-Link is a powerful $10 debug probe for ARM Cortex-M devices and works with the NXP LinkServer for debugging. The LinkServer does not an implement a gdb server, so it limits its usage e.g. for scripting or command line debugging. But as MCU-Link is also a CMSIS-DAP compatible debug probe, I can use it with OpenOCD which is open source and implements a GDB server. This article shows how I can use it with the MCU-Link.
Debugging FRDM-KL25Z with MCU-Link
It has been snowing down to the lower areas in Switzerland the past days: Winter finally arrived in my area. So I consider last weekend the ‘weekend before winter’, at least in a meteorological sense. And because it was a wonderful ‘inversion’ situation with fog below and sunny sky above, it is a good time to share a few impressions.
Nebelmeer
The MCU-Link is a $10 CMSIS-DAP capable debug probe which works out-of-the box with the MCUXpresso Eclipse based IDE. This is great for development, but how can I programming with the push of a button or a script? The answer is no: there is an easy way to use the debug probe outside Eclipse from a shell script, and you can use that MCU-Link probe to do the job. This is especially useful as with the example below where I have to program 60 boards this week-end :-).
Batch Programming Boards with MCU-Link
A very useful feature in Eclipse is Ctrl+Shift+L which lists all the available shortcuts:
List of Shortcuts
Pressing Ctrl+Shift-L again will open up a dialog where I can configure them. But what if the shortcut or action is not listed there?
The NXP Kinetis devices implement a UID (Unique ID) for each device, using the ‘Unique Identification Register) which is part of the SIM (System Integration Module):
SIM Unique ID (NXP K22P144M120SF5RM.pdf Reference Manual)
While this number should be unique, I was wondering last week why students in the labs reported the same UID for multiple robots in the lab. So maybe this number is not so unique as it should be?
Continue reading
The NXP MCUXpressso IDE Release V11.2.1 gave a hint about a coming new debug probe, the MCU-Link which is available now:
MCU-Link in 3D printed enclosure debugging the LPC845-BRK Board
MCU on Eclipse 