Powerful ARM Cortex-M7 microcontroller are on the rise, bridging the gap between traditional microcontroller and Embedded Linux systems. I already published articles for the NXP i.MX RT1052 which is an ARM Cortex-M7 running at 600 MHz. Because the RT105x is available in BGA196 package only, I have as oredered the i.MX RT 1050 EVK which has a similar device on it, but in LQFP package:
i.MX RT1021
The heat wave in Switzerland is still going on, and the best way to escape it is to go up to the mountains and higher lakes. This hike is going up to the Waldisee: a lake high at the end of the Bisistal, Canton Schwyz, Switzerland.
Waldisee
I noticed on Mouser.com that there is a new i.MX RT1050 board: the EVKB one. I have used the EVK (the one without the ‘B’) for several weeks (see “MCUXpresso IDE V10.1.0 with i.MX RT1052 Crossover Processor” and “Adding a Rocktech Capacitive Touch LCD to the NXP i.MX RT1052 EVK“). I needed anyway a second board, so I ordered that EVKB from Mouser, and after some delay and waiting it arrived on my desk. So far this boards seems to be a better one:
i.MX RT1050 EVKB Board
In this short article I show you how to enable one of the hidden gems in Eclipse: how to get a description of the library function used in the code
snprintf() help text
FreeRTOS includes a nice feature to give me information about how much time every task is spending running on the system:
FreeRTOS Runtime Information
This tutorial explains that FreeRTOS Runtime Statistics feature and how it can be turned on and used.
Switzerland has many lakes, the “4-Lake Hike” in the Jochpass region is probably one of the most beautiful hikes in the central part of Switzerland: beautiful flora, stunning mountain and lake views in the mighty Mt. Titlis area.
Trüebsee
NXP has just released the 10.2.1 update of their flagship Eclipse based IDE. While the number increase from 10.2.0 to 10.2.1 indicates a minor release, there are a several things which make me move over to that new release.
MCUXpresso IDE 10.2.1 build 795
My usual workflow is: edit – build – debug and repeat. And this for the same project again and again. So here are a few tips how to make these iterations faster with Eclipse. One thing is to use the F11 shortcut to debug the last launched/debugged application:
Debug Last Launched
The McuOnEclipse GitHub repository hosts many Processor Expert projects and is very popular (cloned more than 1000 times, thank you!). Processor Expert is a powerful framework which generates driver and configuration code, simplifying application development for a wide range of microcontroller and families. But Processor Expert won’t be developed further by NXP and is not part of MCUXpresso IDE. While it is possible to install Processor Expert into MCUXpresso IDE 10.2, how can these projects used ini an IDE *without* Processor Expert? This article describes how to port an existing Processor Expert project into the NXP MCUXpresso IDE.
Ported Project with FRDM-K64F using Adafruit SSD1351 and Processor Expert
It is summer time in Switzerland, and the best time of the year to hike in the Alps and mountains. This time I’ll share with you our journey around the Glattalpsee (Lake Glattalp). Expect stunning views of Swiss mountains, flora, fauna and curious critters:
Kühe auf Glattalp
MCU on Eclipse 