Tag Archives: gnu gcc

Tutorial: How to Optimize Code and RAM Size

Posted on by
18

It is great if vendors provide a starting point for my own projects. A working ‘blinky’ is always a great starter. Convenience always has a price, and with a ‘blinky’ it is that the code size for just ‘toggling a GPIO pin’ is exaggerated. For a device with a tiny amount of RAM and FLASH this can be concerning: will my application ever fit to that device if a ‘blinky’ takes that much? Don’t worry: a blinky (or any other project) can be easily trimmed down.

Binky on NXP LPC845-BRK Board

Binky on NXP LPC845-BRK Board

I use a ‘blinky’ project here just as an example: the trimming tips can apply to any other kind of projects too.

Continue reading →

OpenPnP Solder Dispenser Sneak Preview

Posted on by
6

Many of you are aware of that DIY Pick&Place machine build documented in “Building a DIY SMT Pick&Place Machine with OpenPnP and Smoothieboard (NXP LPC1769)“.

That machine has now been modified to dispense solder paste. I did not had time yet to describe the build, but as I have received recently many questions: here are some pre-information about the build:

Solder Paste Dispenser

Solder Paste Dispenser

Continue reading →

Debug and Execute Code from FLASH on the Seeed Arch Mix NXP i.MX RT1052 Board

Posted on by
19

In my previous article “Seeed Studio Arch Mix NXP i.MX RT1052 Board” I described how I can use and debug the Seeed Arch Mix Board. But so far I only had things running in RAM. Ultimately I want to use the QSPI FLASH memory on the device with my firmware and running code on it. This article shows how to get from RAM execution to SPI FLASH in-place execution (XiP).

Seeed Arch Mix NXP i.MX RT1052 Board

Seeed Arch Mix NXP i.MX RT1052 Board

Continue reading →

Seeed Studio Arch Mix NXP i.MX RT1052 Board

Posted on by
20

The Seeed Studio ‘Arch Mix’ board is a small and versatile development board with an NXP i.MX RT1052 on it, and it costs only $29.90. So I was not able to resist and just have ordered one so I can explore it.

Seeed Arch Mix Top Side

Seeed Arch Mix Top Side

Continue reading →

Generating Intel Hex Files with a given Length using srec_cat

Posted on by
4

The ‘standard’ binary files for many tools are S19, binary or Intel Hex files. Especially for S19 and Intel Hex it can be useful to control the amount of data per line. By default, the GNU objcopy creates files with a line length of 44 characters:

default objcopy binary file line length

default objcopy binary file line length

But it is possible to have Intel Hex files with an custom line length using the SRecord utility, and this is what this article is about.

Continue reading →

Black Magic Open Source Debug Probe for ARM with Eclipse and GDB

Posted on by
15

The ‘Black Magic Probe’ (or in short: BMP) is a very small and open source JTAG/SWD debug probe with a build-in GDB Server. I saw that probe referenced in different places, so I thought I try it out with a few of my NXP LPC and Kinetis boards:

BMP with LPC and Kinetis Boards

BMP with LPC and Kinetis Boards

Continue reading →

New NXP MCUXpresso Eclipse IDE v11.0

Posted on by
31

A few days ago NXP has released a new version of their Eclipse IDE flagship: the MCUXpresso IDE v11.0.

NXP MCUXpresso IDE V11.0.0

NXP MCUXpresso IDE V11.0.0

The previous v10.3.1 was released back in Feb 2019, and the 11.0 now in June this year matches up with the Fall university semester. I appreciate that the releases are about every 6 months, so this gives me time to use it in my university lecture material and lab work. I had the weekend for trying it out, and I’m very pleased.

Continue reading →

SWO with NXP i.MX RT1064-EVK Board

Posted on by
16

With the cost of an single pin, many ARM Cortex-M boards including the NXP i.MX RT1064 can produde SWO data: think about a pin able to stream data out of the chip in realtime. For example interrupt activity which otherwise might be hard to capture:

SWO Interrupt Trace

SWO Interrupt Trace

Continue reading →

Reverse Engineering of a Not-so-Secure IoT Device

Posted on by
38

The ‘Internet of Things’ is coming! It started as an overused marketing hype with no real use case (who needs internet connected fridges? Who wants the internet connected toilet paper?).

New ‘things’ start to pop up, useful or not: From smart bulbs (Philips Hue), thermostats (Nest), smart TV (Samsung and others) up to voice assistants (Alexa, Cortana, Google). You might even have installed one of these, right? What about temperature and humidity sensors? Probably there is nothing wrong with that?

But what would you think if one morning you find a strange unknown device installed under your working desk, connected to the cloud and internet?

IoT Device attached under a working desk
IoT Device attached under a working desk
Continue reading →

MCUXpresso Eclipse IDE Mouse Tips & Tricks

Posted on by
Reply

In a modern development workflow both command-line and a graphical user interface has its place. On the GUI side, Eclipse is famous that it offers many different ways to accomplish something which is great. But sometimes I continue to use an old habit or way because I have missed that there is a newer and better way, and the MCUXpresso Eclipse IDE is no exception to that. In this article I show a few ways how to use the mouse even more productive.

Project Settings

Project Settings

Continue reading →