It has been a while since my last MetaClockClock, and with the continued shortage of electronics on the market I had no chance to order new parts. But I still had some remaining parts, and with the modular design of the ’round’ clocks I was able to build up another one, but this time with even less than the usual minimum of 24 clocks:
So if you are up to build a MetaClockClock with less clocks, this might be the way for you.
Continue readingG-Code (or RS-274) is a widely used protocol for CNC machines. I have added vinyl cutting capabilities to the Shapeoko desktop CNC recently (see DIY Vinyl Cutting Drag Knife for Desktop CNC), however cutting vinyl with a drag knife is whole different story compared cutting materials like wood or aluminum. As with many other things, it is about handling all corner cases properly.
Among the many wonderful things that nature can provide, I love to watch damselflies flying above the water. It is pretty hard to catch one of these insects, but today I was lucky to capture one of these shiny predators:
Damselflies are similar to Dragonflies, but smaller and have slimmer bodies.
Happy flying 🙂
A desktop CNC is a great addition to any 3D printer or laser cutter. I consider them ‘the trinity’ for any maker garage. While a desktop CNC is great for wood and some metals like aluminum or brass, it would be great to extend the infrastructure with something more: vinyl cutting. And with this the idea to have cool sticker on my laptop lid:
Kleiner Fuchs (German), Small Tortoiseshell (English) or Algais Urticae is a colorful mid-size butterfly, found in most parts of Europe and across Asia. The caterpillars feed on nettles. With intensive farming and agriculture, nettles have been reduced and butterflies like this one have been impacted. With the recent trend to have more natural meadows, the population of butterflies like this one starts growing again. I hope to see more of them this year!
Happy Flying 🙂
Welcome to ‘Alice in Wonderland‘! For a university research project using an ARM Cortex-M33 we are evaluating position-independent code as way to load applications or part of it with a bootloader. It sounds simple: just add -fPIC to the compiler settings and you are done.
Unfortunately, it is not that simple. That option opened up a ‘rabbit hole’ with lots of wonderful, powerful and strange things. Something you might not have been aware of what could be possible with the tools you have at hand today. Leading to the central question: how is position-independent code going to work with an embedded application on an ARM Cortex-M?
Let’s find out! Let’s start a journey through the wonderland…
Continue readingThis is a new article in my series about using Microsoft Visual Studio Code: After installation, project setup, building, debugging, setting up a kit and IntelliSense. This one is about setting up and using FreeRTOS:
I always have been fascinated by electromechanical stuff like these Flip-Dot Displays.
Dangling pointers and memory corruption problems are nasty issues for any developer, and usually hard to find and locate in the code. Luckily Google has developed an open source tool to solve such issues: the Address Sanitizer (ASAN). The tool is available for x86 and other desktop style architectures, including Android and Linux. This article describes how ASAN can be used for an embedded target, e.g. ARM Cortex-M4 or similar.
Fantastic view to the South today on a hike around the ‘Engelstock’:
The snow covered Swiss Alps in the background with Ingenbohl-Brunnen and Lake Lucerne in the middle and Lake Lauerz on the right. If you want to see the view from the peak (Mt. Hochflue) on the right, see this post.
Happy viewing:-)
MCU on Eclipse 