Using IP (Ethernet) based debug probes is a very handy thing: I don’t have to be directly connected to the debug probe (e.g. with the USB cable). This article explains how to use an IP-based Segger or P&E probe with the Eclipse based MCUXpresso IDE.
LAN Based Debugging
Posted in ARM, Boards, Cortex, CPU's, Debugging, Eclipse, Embedded, Kinetis, LPC, LPC, MCUXpresso, MCUXpresso IDE, NXP, Tips & Tricks, Tutorial |
Tagged ARM, Debug Probe, Debugging, Eclipse, Freescale, Launch Configuration, NXP, P&E, Remote Debugging, Segger, software, TCP/IP, technology, Tips&Tricks |
Part 1 of this series I have covered the SD card on the Arduino Ethernet shield. In Part 2 I’m hooking up the board to the network and will be able to ping it 🙂
Arduino Ethernet Shield with FRDM-KL25Z
Posted in Boards, Embedded, Embedded Components, Kinetis, KL25Z Freedom Board, Processor Expert, SPI |
Tagged Embedded Component, freedom board, Freescale, KL25Z Freedom Board, open source projects, Processor Expert, software, software project, SPI, TCP/IP, W5100 |