In “Overview: From Snippets to Code Generation” I discussed several tools used in my development process. On tool which helps me a lot to get things done is Processor Expert. In this post I’ll give an overview about this tool and reasoning for the pros and cons of using it.
Processor Expert
On SourceForge I have published an update of the McuOnEclipse software components, with following major changes:
McuOnEclipse SourceForge Release 2015-10-17
How about to use the Freescale FRDM-KL43Z board (see “Unboxing the Freescale FRDM-KL43Z Board“) to play a Tetris game?
I won’t be able to attend the Maker Faire in Rome (16. – 18. Oct. 2015). But five of the Sumo bots students from the previous semesters have built and programmed will be there.
Sumo Robots
Flying a quadrocopter without some sensor and microcontroller intelligence will be a challenge. Definitely I will need some intelligent sensor data to help me out :-). Luckily, there is a Freescale ‘Sensor Fusion Toolbox’ and Library which gives me a nice start and visibility into the sensors I plan to use:
Sensor Fusion Data
Probably for cost reasons, the Freescale FRDM-K22F does not come with the micro SD card socket populated on the the board:
Freescale FRDM-K22F Board with no SD card socket
With a little soldering skills it is possible to populate the socket so the board can be used with a file system on it :-):
Using SD card with FRDM-K22F Board
It is possible to use the Freescale FRDM-KL43Z to debug another board (see “Using the Freescale Freedom (FRDM-KL43Z) to Debug other Boards“). The FRDM-KL43Z has an on-board debug probe integrated, the OpenSDA. But it is easily possible to debug the board directly with a SWD debug probe like the P&E Universal Multilink or the Segger J-Link.
Debugging the FRDM-KL43Z with SWD
I don’t own a Mac computer, and I try to keep my tutorials as multi-host-platform as possible. So it is always cool to see if someone else posts a nice tutorial on a different host machine: For all Mac (and as well non Mac) users, have a look at this tutorial Nash Reilly has posted: “An Introduction to Freescale’s Kinetis Design Studio.”
It nicely explains downloading and installing KDS with the Kinetis SDK and then run a ‘hello world’ program on the hardware.
And very worthwhile to check out Nash’s other articles here too: http://www.allaboutcircuits.com/author/nash-reilly
Happy Nashing 🙂
In “Kinetis Drone: Frame Construction with Graupner Race Copter Alpha 250 Q” I have assembled the frame for my Kinetis Drone. In this post I’m going to drive the ESC’s (Electronic Speed Controllers) with the Freescale FRDM-K22F board:
Graupner S3055 ESC (Source: Graupner)
FreeRTOS is probably the most popular RTOS used and I love it: it is efficient, has a lot of features, simple and easy to use. But despite its popularity, debugging it with open source tools as with Eclipse and GDB is really not that user-friendly: debugging threads/tasks is a pain compared to commercial solutions. For my university classes this semester I was looking for something easy to use by my students. Finally I managed to use a GDB helper which makes things easier now: I can switch task threads in Eclipse with GDB now 🙂
Switched to Shell Task
MCU on Eclipse 