The FRDM-KL25Z Open Source Logic Analyzer based on SUMP presented here was already very useful with the added trigger support. But it was not capable to do a sampling rate above a few hundred kHz. That’s ok for slower probing, but not for anything with a higher speed. Using DMA (Direct Memory Access) instead of timer based sampling can remove that limitation :-).
FRDM-KL25Z used as Logic Analyzer on another FRDM-KL25Z board
Finally I have found some time over the past week-end to enhance my Zumo robot. After I had my line following robot based on the Pololu Zumo chassis and the FRDM-KL25Z, I thought it should be easy and logical to solve a maze. Logical: yes. Easy: not that much. In fact it took me longer than expected. As always, there are a lot of tiny and important problems to solve (the maze alone was easy 🙂 ).
Zumo in the maze
For many of my applications I’m using a PWM (Pulse Width Modulated) signal. One example is the motor driver used in this project where I use one PWM signal for each motor. Another usage of PWM is to control the brightness of an LED. Processor Expert makes usage of the PWM hardware easier. Still, for some settings it is good to have the resulting signals in mind. So in this post I’m showing how the settings impact the PWM signal generated.
There is now an example project available on GitHub which runs FreeRTOS on the FRDM-KL05Z board:
FRDM-KL25Z Board with FreeRTOS
Because my first line following robot was this week at the Embedded World conference in Nürnberg, I have constructed another one around the Freedom FRDM-KL25Z board. It is based on Pololu part items and the Arduino motor shield, plus using a Bluetooth module I have used in an ealier post.
Pololu Line Following Robot with FRDM-KL25Z
Sometimes I’m looking for a functionality, and I cannot find it. But this does not mean that it does not exist ;-).
The Eclipse preference pages have a great filter text field: If I want to change a setting which has something to do with ‘color’, I can enter that text and it will show me all setting pages having something to do with ‘color’:
Eclipse Preference Filter
Sometimes things take longer than anticipated. And this is definitely the case for my USB MSD Host project where I wanted to use a USB memory stick with the Freedom FRDM-KL25Z board.
Memory Stick attached to the Freedom Board
But finally, I have things working. At least most of the time ….
The first FRDM-KL25Z Freedom Logic Analyzer firmware was missing one important feature: Triggers! But this weekend the firmware has evolved a bit :-).
Trigger Settings
After working on an ADC example, a DAC one was missing. Julio E. Fajardo is a reader of this blog, and he was so kind to send me an example project for the FRDM-KL25Z. The example is able to produce produce different waveforms with the DAC. The project has two examples which they are enabled/disabled in main(). One example waveform the sawtooth:
Sawtooth_FDRM_DAC
I’m using serial communication in different flavors for my project: with the shell, with OpenSDA USB CDC, to use printf(), and with the Bluetooth module. Processor Expert is a big helper, but as for any software, it is not bug free. And there is a problem with Processor Expert in CodeWarrior for MCU10.3 in respect with Baud settings for a serial interface.
Probing the Bluetooth Module Serial Connection
MCU on Eclipse 