While developing my driver for the Electronic Speed Controllers (ESC’s) for my quadrocopter (see “Kinetis Drone: Driving the Electronic Speed Controllers“), I noticed a some strange smell, followed by a failure of one motor ESC 😦
Quadrocopter ESCs
I won’t be able to attend the Maker Faire in Rome (16. – 18. Oct. 2015). But five of the Sumo bots students from the previous semesters have built and programmed will be there.
Sumo Robots
Flying a quadrocopter without some sensor and microcontroller intelligence will be a challenge. Definitely I will need some intelligent sensor data to help me out :-). Luckily, there is a Freescale ‘Sensor Fusion Toolbox’ and Library which gives me a nice start and visibility into the sensors I plan to use:
Sensor Fusion Data
Probably for cost reasons, the Freescale FRDM-K22F does not come with the micro SD card socket populated on the the board:
Freescale FRDM-K22F Board with no SD card socket
With a little soldering skills it is possible to populate the socket so the board can be used with a file system on it :-):
Using SD card with FRDM-K22F Board
It is possible to use the Freescale FRDM-KL43Z to debug another board (see “Using the Freescale Freedom (FRDM-KL43Z) to Debug other Boards“). The FRDM-KL43Z has an on-board debug probe integrated, the OpenSDA. But it is easily possible to debug the board directly with a SWD debug probe like the P&E Universal Multilink or the Segger J-Link.
Debugging the FRDM-KL43Z with SWD
I don’t own a Mac computer, and I try to keep my tutorials as multi-host-platform as possible. So it is always cool to see if someone else posts a nice tutorial on a different host machine: For all Mac (and as well non Mac) users, have a look at this tutorial Nash Reilly has posted: “An Introduction to Freescale’s Kinetis Design Studio.”
It nicely explains downloading and installing KDS with the Kinetis SDK and then run a ‘hello world’ program on the hardware.
And very worthwhile to check out Nash’s other articles here too: http://www.allaboutcircuits.com/author/nash-reilly
Happy Nashing 🙂
In “Kinetis Drone: Frame Construction with Graupner Race Copter Alpha 250 Q” I have assembled the frame for my Kinetis Drone. In this post I’m going to drive the ESC’s (Electronic Speed Controllers) with the Freescale FRDM-K22F board:
Graupner S3055 ESC (Source: Graupner)
FreeRTOS is probably the most popular RTOS used and I love it: it is efficient, has a lot of features, simple and easy to use. But despite its popularity, debugging it with open source tools as with Eclipse and GDB is really not that user-friendly: debugging threads/tasks is a pain compared to commercial solutions. For my university classes this semester I was looking for something easy to use by my students. Finally I managed to use a GDB helper which makes things easier now: I can switch task threads in Eclipse with GDB now 🙂
Switched to Shell Task
“Success is going from failure to failure without loss of enthusiasm.”
– Winston Churchill
Every day, there is something new to learn. And having problems is always a good learning opportunity :-). Yesterday we were able to find a strange problem with our tinyK20 prototypes, just before we were about to send the design for manufacturing.
Kinetis K20 on tinyK20 Board
MCU on Eclipse 