I know: A new McuOnEclipse Processor Expert components release was long overdue. But I have been extremely busy in the last months, but now the university semester is over, and I have finally some spare time to catch up on a lot of things. So here we go: there is a new component release available on SourceForge (https://sourceforge.net/projects/mcuoneclipse/files/PEx%20Components/): Components 2015-07-05.zip
McuOneEclipse Components on SourceForge
There are cases when I need to do a reset of the device by software. For example I have loaded the application image with the bootloader, and then I need to perform a reset of the microcontroller to do a restart. As a human user I can press the reset button on the board. But how to do this from the software and application running on the board, without user manual intervention? Or if I simply want to reset the system for whatever reason?
In my classes I’m mainly using the Freescale FRDM-KL25Z board, as it provides the best value for the money, and 128 kByte FLASH with 16 kByte of RAM is enough for many smaller projects. I do have as well the FRDM-KL02Z Board (32 KByte FLASH, 4 KByte of RAM) which is an inexpensive board to evaluate the smaller KL02Z microcontroller. Because someone reported a problem not being able to use the UART over OpenSDA/USB-to-CDC bridge, I have created a demo project which communicates with a console on the host.
FRDM-KL02Z Board
For a project I want to use the Teensy 3.1 board (see “Hacking the Teensy V3.1 for SWD Debugging“) in USB CDC mode: that way the Teensy board can connect to the host and exchange data or attach a console to the Teensy board: that way I can connect the Teensy over USB to the host use the USB as communication interface:
Teensy with Octo WS2811 Board
Frequent readers of this blog know: I’m using Processor Expert in most of my projects with CodeWarrior, Driver Suite or Kinetis Design Studio. With the move of Freescale to Kinetis Design Studio and the Kinetis SDK with Processor Expert, there is an opportunity for our voice to be heard in a survey Freescale now runs about configuration tools and Processor Expert.
Processor Expert
Happy Surveying 🙂
In one of my earlier posts (“Using the DHT11/DHT22 Temperature/Humidity Sensor with a FRDM Board“) I’m using the DHT11/DHT22 temperature/humidity sensors with the FRDM-KL25Z board. These sensors are very inexpensive, but have limited measurement range and accuracy. As pointed out by a reader of that article, Sensirion (a Swiss company :-)) has good sensors too, and I decided I would like to try the SHT11 sensor:
SHT11 Sensor
For a home automation project I need to know the room temperature and humidity percentage of the room air. Adafruit has an inexpensive DHT11 sensor from http://www.aosong.com which I decided to use for that project.
Test Setup for DHT11 Sensor
There is a new release of the McuOnEclipse components available on SourceForge, with the following main changes:
SourceForge McuOnEclipse
For everyone who wants to combine the power of Eclipse and Processor Expert with the IAR Embedded Workbench IDE, here is how to get them working side by side:
Continue reading
It has been a while since the last version, but finally there is a new release available on SourceForge, with the following highlights:
Components Release
MCU on Eclipse 