Category Archives: ARM

A Flying UAV Drone Full of Sensors

Posted on by
6

One goal of this blog is to inspire engineers, in one way or another. And when I get reports back that things were useful, I like to share it :-).

So here is something what a team of young undergraduates (Przemyslaw Brudny, Marek Ulita, Maciej Olejnik) did for theirs Master Thesis work at the Politechnika Wroclawska, Poland: a very cool flying machine controlled by two Kinetis K66, having many sensors (on own designed boards) with a custom debug/programmer board similar to the tinyK20, developed with the NXP Kinetis Design Studio:

Plane Model

UAV (Source: Thesis of Przemyslaw Brudny)

Continue reading →

INTRO FS2016 Semester Closing with Robot Maze Challenge

Posted on by
Reply

“Learning-by-doing” is one of the core principles of my embedded systems and robotics course at the Lucerne University. For this the students apply what they learned using a robotics platform. In earlier semesters we did a Sumo battle at the end. This time the challenge was to build a remote controller plus to add the ability to explore and solve a line maze:

maze solving robots

maze solving robots

Continue reading →

NXP FlexIO Generator for the WS2812B LED Stripe Protocol

Posted on by
19

The challenge with the selection of a microcontroller for a project is: which one has the required number of UART, I2C, SPI? Combine this with the desired package (48pins, 64pins? LQFN?), the needed FLASH and RAM size and then even the hundreds of available microcontroller shrink to a handful only. And many times I need to make compromises: such as I need two hardware I2C, but the microcontroller matching all my other needs has only one I2C hardware. So I might end up with bit-banging the slower I2C bus. Doable, but not ideal.

What is cool that some of the newer NXP Kinetis microcontroller come with an interesting hardware: FlexIO. A peripheral hardware which allows me to implement a custom protocol, including driving WS2812B (Adafruit NeoPixel) LEDs with a FRDM-KL43Z board:

Four NeoPixels with FlexIO

Four NeoPixels with FlexIO

Continue reading →

Tutorial: Blinky with NXP Kinetis SDK V2.0 and Processor Expert

Posted on by
11

In “Mother of Components: Processor Expert with NXP Kinetis SDK V2.0 Projects” I presented an approach how to use Processor Expert components with the NXP Kinetis SDK. This article is a tutorial how to create a blinking LED project with that approach, using McuOnEclipse Processor Expert components and the Kinetis SDK V2.0. As board the FRDM-K22F is used:

Blinky on a FRDM-K22F with SDK V2.0 and Processor Expert

Blinky on a FRDM-K22F with SDK V2.0 and Processor Expert

Continue reading →

NXP FTF Hands-On with FreeRTOS Task Aware Debugger

Posted on by
35

I mentioned the hands-on sessions on FreeRTOS I do this week at NXP FTF Tech Forum in Austin in my previous post. What we are using in the session is an Eclipse plugin in Kinetis Design Studio showing all kinds of FreeRTOS information:

NXP FreeRTOS Plugin in Kinetis Design Studio

NXP FreeRTOS Plugin in Kinetis Design Studio

Continue reading →

FreeRTOS Thread Debugging with Segger GDB in Eclipse

Posted on by
28

NXP FTF Tech Forum in Austin has been a blast! I’m running another FreeRTOS hands-on session (FTF-DES-N2048) this afternoon which yet again is fully booked. But we will squeeze in as many as possible from the waiting list.

One very exciting thing we are going to use is FreeRTOS thread awareness in Eclipse/Kinetis Design Studio: to see and debug the FreeRTOS threads in Eclipse using the Segger GDB and it will show the list of threads in the Debug view:

FreeRTOS Thread Awareness with Segger GDB

FreeRTOS Thread Awareness with Segger GDB

Continue reading →

Mother of Components: Processor Expert with NXP Kinetis SDK V2.0 Projects

Posted on by
34

Unfortunately, now the NXP Kinetis SDK V2.0 does not include Processor Expert support (see “First NXP Kinetis SDK Release: SDK V2.0 with Online On-Demand Package Builder“). But at the Lucerne University we are using more than 150 different custom Processor Expert components we would like to use with that new SDK. So how to make them working with the Kinetis SDK V2.0? Using a Processor Expert as “the mother of all components”:

NXP Kinetis SDK V2.0 and Processor Expert Side-by-Side under Eclipse

NXP Kinetis SDK V2.0 and Processor Expert Side-by-Side under Eclipse

Continue reading →

McuOnEclipse Components: 8-May-2016 Release

Posted on by
12

Time is passing fast, and many components have been updated to make the compatible with the NXP Kinetis SDK V2.0. As a highlight, besides of FreeRTOS the following components are now usable with the NXP Kinetis SDK:

Components compatible with Kinetis SDK

Components compatible with Kinetis SDK

Continue reading →

Programming S-Records with GNU ARM Eclipse Debugger Plugins

Posted on by
3

By default I’m programming the Elf/Dwarf (.elf) file present in the GNU ARM Eclipse debug configuration:

Elf File to be Downloaded

Elf File to be Downloaded

But how to program the board with something different from the .elf file?

Continue reading →

Changing Heap and Stack Size for NXP Kinetis SDK V2.0 gcc Projects

Posted on by
9

With Processor Expert projects it is very easy to change the heap and stack size: There is a setting for this in the Cpu component settings, under the ‘Build options’ tab:

Heap and Stack Size with Processor Expert

Heap and Stack Size with Processor Expert

As there is no Processor Expert in the NXP Kinetis SDK V2.0 (see “First NXP Kinetis SDK Release: SDK V2.0 with Online On-Demand Package Builder“), how to do the same in a SDK V2.0 project?

Continue reading →