Using Parallel Builds: what is optimal?

Posted on by
5

One of the new features in CodeWarrior for MCU10.2 is the ability to build in parallel. Does not sound exciting? Well, when I tried this the first time in MCU10.2, I noticed immediately the reduction in build time: twice as fast compared to MCU10.1!!!. Wow! This improvement is based on using a make utility which can spawn multiple jobs on multicore host machines. CodeWarrior tries to use an optimized setting to make the build as fast as possible using parallel builds. The question is: is it really optimal?

Continue reading →

Traps&Pitfalls: Overlapping Interrupt Priorities

Posted on by
Reply

It happens to me that I run into a really, really nasty problem. I spend hours (if not weeks) to get it resolved. Strong coffee and the problem keeps me up at long nights. I think every embedded system engineer knows what I’m talking about. Yeah, most of the time it is my fault or an oversight. But once in a while I’m convinced that I have found a real bug. Then I report it back to the vendor to fix it. I hope my report will prevent another engineers to run into the same problem. Or that I learn something else as a by-product. Oh yes….

Continue reading →

MCU10.2 Update 1.0.0 released

Posted on by
Reply

The update 1.0.0 for the MCU10.2 release has been published on the Freescale CW MCU V10.2 Updates & Patches web site. Downloading the 500 MByte zip file and installing the update will take a while. After downloading I select Help > Install New Software … and specify the archive file.

Note: In general uninstalling an eclipse update is not possible. If you want to keep our original MCU10.2 on the side, then follow this trick: Copy your existing MCU10.2 installation folder and rename it (say to ‘MCU10.2_without_update’). Then apply the update to the normal MCU10.2. If you want to revert to the version without the update, simple delete the updated installation and rename the one without the update again. No need to reinstall things again. And you can use both the updated version and the normal version in parallel too: simply launch the eclipse\cwide you want 🙂

Time to read the release notes and dig into what has been changed and improved.

Continue reading →

FSL_USB_Stack updated: sending 16 or 32 byte blocks

Posted on by
6

The FSL_USB_Stack Embedded Component presented in “USB CDC, reloaded” has been updated to V1.004 and is available here. I was running into issues if the USB CDC stack had to send out either 16 or 32 bytes of data in the App_Task() function. In that case the data is not sent until the next USB_Class_CDC_Interface_DIC_Send_Data() request.

Continue reading →

10 Best Eclipse Shortcuts

Posted on by
24

Yes, eclipse is a very visual and GUI oriented IDE. But this does not mean that everything is mouse oriented. While programming I have my hands on the keyboard. So I want to do as much as possible with shortcuts and the keyboard. The good news is that eclipse comes with a great set of helpers built-in. Here is my list of my favorite hotkeys and shortcuts…

Continue reading →

Scripting: The Debugger Shell, Getting started…

Posted on by
11

(This is the first in an occasional series around the scripting in eclipse and CodeWarrior. Post a comment – let me know what you think!)

Writing code should be fun, and debugging it is just a necessity because I rarely get it right the first time. Eclipse with its GUI is a great thing, and so is a command line interface. Luckily the CodeWarrior eclipse engineers have added that kind of tool for the CodeWarrior debugger: the Debugger Shell as command line debugger using the TCL scripting language. This gives me a powerful way to deal with the embedded target board: from basic access to memory, to stepping and controlling the execution up to programming the flash memory.

Continue reading →

Sneaking from Processor Expert

Posted on by
3

Processor Expert is great: it generates initialization code and driver sources for me. This makes it a great knowledge and source base for non-Processor Expert projects too. Wondering how to initialize the SCI? What are again the register settings to use the CPU with a 6 MHz clock rate using an external crystal in low power mode? Lets generate a Processor Expert project to find out. Then copy-past the drivers or parts of it into my non-Processor Expert project. But How to do this?

Continue reading →

Linting without a plugin

Posted on by
17

With “Eclipse and PC-lint: Linticator” I have a plugin to lint my sources in a comfortable way. But I can do this as well without a plugin. For this I use a batch file with a build configuration, plus settings to get the PC-lint messages into the Problems view. Yes, this does not sound easy, but is very doable and straight forward once I have set it up. It gives me complete control on every little detail. Here is how I do it… Continue reading →