Category Archives: TWR-K21D50M

Bricking and Recovering OpenSDA Boards in Windows 8 and 10

Posted on by
33

Getting a board from a distributor like Farnell/Element14/Mouser (add your own distributor) means that chances are high that the default firmware on it is written years from now because the inventory has not been updated, or because boards are still produced with that original firmware (because of testing?). So what happens if I use board with a firmware developed pre-Windows 8/10 area?

Freshly Unboxed NXP FRDM-KL25Z Board

Freshly Unboxed NXP FRDM-KL25Z Board

It might work, but chances are high that the bootloader and firmware is not ready for the ‘modern age’, and as a result the board might be bricked. If you still have a Windows 7 machine around (I do!), you are lucky. If not, then you need to read this article….

Continue reading →

Kinetis Unique Identification Register

Posted on by
8

For my RNet stack I need a way to identify nodes in the network using a unique address. What I need is Media-Access (MAC) address. Base on such a unique address I can assign short addresses (e.g. with a DHCP or similar protocol to automatically assign shorter network addresses). So how to uniquely identify my network nodes?

The Freescale Kinetis microcontroller have nice feature: they have a Unique Identification Register (UID) which would be a perfect fit for a MAC address :-).

UID Output

UID Output

Continue reading →

USB for the Freescale ARM Kinetis KL46Z and K21D50M

Posted on by
30

As I was so pleased with the FRDM-KL46Z board, that I have ordered the Tower version of it, the TWR-KL46Z48M:

FRDM-KL46Z with TWR-KL46Z48M

FRDM-KL46Z with TWR-KL46Z48M

What I missed so far was USB support for the KL46Z. So time to have a quick look at board(s) and to add USB support for it.

Continue reading →