Over the weekend, I finally have repaired the broken ESC (see “Kinetis Drone: Graupner ESC S3055 Failure“). Time to run some first test flights :-).
Kinetis Drone Flying Tests
Kinetis Drone: First Test Flights
8
Tag Archives: Quadrocopter
Kinetis Drone: Graupner ESC S3055 Failure
While developing my driver for the Electronic Speed Controllers (ESC’s) for my quadrocopter (see “Kinetis Drone: Driving the Electronic Speed Controllers“), I noticed a some strange smell, followed by a failure of one motor ESC 😦
Quadrocopter ESCs
Kinetis Drone: Driving the Electronic Speed Controllers
In “Kinetis Drone: Frame Construction with Graupner Race Copter Alpha 250 Q” I have assembled the frame for my Kinetis Drone. In this post I’m going to drive the ESC’s (Electronic Speed Controllers) with the Freescale FRDM-K22F board:
Graupner S3055 ESC (Source: Graupner)
Kinetis Drone: Frame Construction with Graupner Race Copter Alpha 250 Q
Yesterday I started with something I had in my mind for a very long time:
to build my own DIY drone based on a Kinetis 🙂
Kinetis Quadrocopter Drone
MCU on Eclipse 