Weissdorn/Hawthorn (Crataegus monogyna)

Image

I like the Crataegus or ‘Hawthorn’. The small white flowers of the white variant are not really spectacular alone, but together they build a beautiful ensemble:

Weissdorn

Weissdorn (click to enlarge)

The Hawthorn provides food and shelter for many birds. And according to legends, they are associated with fairies.

Happy Flowering 🙂

Advertisements

Tutorial: MCUXpresso SDK with Linux, Part 3: RAM and XiP Code on i.MX RT1064

In my previous articles I have used the command line on Linux to build and debug NXP MCUXpresso SDK applications. In this article I’m running code on NXP i.MX RT1064 in RAM or FLASH.

i.MXRT1064 board with LPC845-BRK as debug probe

i.MXRT1064 board with LPC845-BRK as debug probe

Continue reading

Internal and External Debug Options for the NXP LPC55S69-EVK Board

The LPC55S69-EVK board comes on-board debug probe. The board includes the LPC4322JET100 device which acts like NXP LPC-Link2 debug probe:

LPC4322JET100 on LPC55S69-EVK

LPC4322JET100 on LPC55S69-EVK

But it is easily possible to use the board with an external debug probe or re-program the onboard one as a SEGGER J-Link debug probe.

Continue reading

Building a Raspberry Pi UPS and Serial Login Console with tinyK22 (NXP K22FN512)

There are different ways to ruin a Linux system. For the Raspberry Pi which uses a micro SD card as the storage device by default, it comes with two challenges:

  1. Excessive writes to the SD card can wear it out
  2. Sudden power failure during a SD card write can corrupt the file system

For problem one I do I have a mitigation strategy (see “Log2Ram: Extending SD Card Lifetime for Raspberry Pi LoRaWAN Gateway“). Problem two can occur by user error (“you shall not turn it off without a sudo poweroff!”) or with the event of a power outage or black out. So for that problem I wanted to build a UPS for the Raspberry Pi.

Raspberry Pi with UPS System and tinyK22

Raspberry Pi with UPS System and tinyK22

Continue reading